Setting up your hunting blind for the first time can be a little confusing, but with a little practice, you’ll be able to pop up and take down your hunting blind in no time. Follow the directions below to set up your hub style hunting blind.

1. Remove the hunting blind from the bag and set the hub end on the ground. (See Figure 1).

Figure 1

2. Unfold the hunting blind and screw in the anchor at one corner eyelet. (See Figure 2).

Figure 2

3. Jerk up hard on the top hub so that it pops up. (See Figure 3).

Figure 3

4. Pull out the side hub while pushing against the top center. (See Figure 4).

Figure 4

5. Pull out the remaining side hubs. (See Figure 5).

Figure 5

6. Install the remaining anchors as needed around the base of the hunting blind. You can also use the anchors along with the included rope as outriggers for the hub when attached to the outside hub eyelet. (See Figure 6).

Figure 6

Read more…

For instructions on taking down your blind, see our post on How to Take Down a Hunting Blind.